The V3-BTF 1" Pixel Show Blade is our newest blade. It's bright, and has reduced shadowing.
Show blades are not rated for any type dueling or object contact and is not covered under our combat warranty. Check our our V3 Battle Blades for dueling!
Our Pixel Battle Blades:
- Utilizes the latest LED technology.
- Are expertly made with TCSS components.
- Compatible with any saber that utilizes TCSS and PlecterPixel pin setups.
- LED Strips soldered directly to the PCB, which increases blade strength, and makes them ideal for sabers with shallow emitters.
The sanding option removes the plastic look of the blade, helps with light diffusion, and is generally considered a personal preference.
Please note that the V3 blade shadowing (side shadowing and mid joint shadow) is an aspect of WS2812B led strips. While we take extra steps to minimize these shadows, its impossible remove shadowing completly and shadows are not covered by our warranties. If you're looking for a blade with minimal shadow, the V2-KR is a better choice.
*Please note that our blades are made from TCSS blade tubes. TCSS set the standard for blade sizes. Each saber company has their own tolerances and definition of 1 inch and 7/8. As such, our blades may fit too tight or loose on non Bendu Armory sabers and we are not responsible for making sure our blades fit every saber on the market and nor will this be considered a warranty item. As such, if you find your blade fits too tight, we recommend sanding the base with 220 grit sand paper and then finishing with 400 for a smooth look.
**We do not warranty blades with incompatible or incorrectly wired saber systems or the accompanying components or nor are we responsible for damage on systems.
***Data resistor is blade side.
|Dimensions||1.010 in. x 20-40 in.
3.5 pixels per inch